Warning messages
WARNING:
Under certain conditions the system shows a dialog box in the
middle of the tube head display containing a warning message
with an error code. This message informs the user that either a
problem has occurred or that a requested action cannot be
performed. The user must contact the service organization. Do
not use the system until the problem is resolved.
Details on the contents of messages can be found in the service
documentation which is available to service personnel. Error codes look like
this: "Error C 0x01", where "C" is a character that indicates where the problem
is located:
• "T" Radiographic table
• "S" Floor mounted column
Figure 89: Warning message on the tube head display
170 | Valory (system with floor mounted column) | Problem solving
0426A EN 20220804 1858
To Next Page
Loading...
