DR Detector Switch
The DR Detector Switch shows which DR Detector is active and shows its
status. The DR Detector Switch can be used to activate another DR Detector.
The DR Detector Switch can be switched to CR, depending on the
configuration.
Figure 44: DR Detector Switch
Related Links
X-ray modality status frame on page 102
DR detector status
Table 12: Status of the battery
Battery status icon
Meaning Full Medium Low Empty Charging
Table 13: Status of the network connection
Connection status icon (wi-
fi/wired)
Meaning Strong Normal Weak Wired DR Detector
Table 14: Status of the DR detector
DR detector
status icon
(blinking)
Meaning Ready Initializing expo-
sure
Error Sleep One DR detector
must be selected
Valory (system with floor mounted column) | Software Console | 105
0426A EN 20220804 1858
To Next Page
Loading...
