AGFA Valory - General Safety Directions

General Safety Directions
WARNING:
Safety is only guaranteed when an Agfa certified field service
engineer has installed the product.
WARNING:
Risk of heavy weight causing physical injury. The system
components must be installed and used according to the
instructions.
WARNING:
The rails of the floor mounted column may be an obstacle when
moving around the system. Be careful not to trip over the rails.
Falls could result in injury.
WARNING:
The product must only be installed using released components
and in released configurations.
WARNING:
Unauthorized manipulation or opening of the equipment
housing may lead to personal injuries and to property damage.
Take all necessary precautions with respect to the applicable
level of safety.
WARNING:
To avoid risk of electric shock, this equipment must only be
connected to a supply mains with protective earth.
WARNING:
Do not use any power supply other than specified by Agfa for
use with the equipment. Otherwise, it may result in fire or
electric shock.
WARNING:
Do not connect the equipment with anything other than
specified. Doing so may result in fire or electric shock.
CAUTION:
Install the NX workstation at a minimum (safe) distance of 2 m
from the X-ray system components or provide a wall or window
to separate both systems.
Valory (system with floor mounted column) | Safety Directions | 73
0426A EN 20220804 1858