Unloading of the bucky in the wall stand
To unload the bucky with a detector:
1. Open the bucky drawer completely by pulling the handle.
2. Unlock the clamps by turning the lock lever counterclockwise.
Figure 87: Unlock icon
3. Open the clamps, while keeping the detector in position with one hand.
4. Remove the detector.
5. Load the bucky with another detector.
• Alternatively, close the bucky drawer using the handle.
Valory (system with floor mounted column) | Bucky | 155
0426A EN 20220804 1858
To Next Page
Loading...
