1290 Infinity Quaternary Pump User Manual 57
Using the Pump
4
Setting up the Pump with the Instrument Control Interface
Options:
• Pressure Unit:
select the pressure units from the drop- down list (bar, psi or MPa).
• Seal wash installed:
This check box is marked to indicate that an optional seal wash has
been detected during autoconfiguration.
• Installed mixer:
The installed mixer is detected during autoconfiguration. For manual
configuration, click the down- arrow and select the installed mixer from
the list or choose No mixer installed.
Configure Solvent Type Catalogs: Displays the Solvent Type Catalogs dialog box,
which allows you to import and export solvent calibration data. See
“Importing Solvent Calibration Tables” on page 88.
Please refer to the online help of your user interface for more detailed
information.
To Next Page
Loading...
