Agilent Technologies 1290 User Manual

56 1290 Infinity Quaternary Pump User Manual
4 Using the Pump
Setting up the Pump with the Instrument Control Interface
Instrument Configuration
Use the Instrument Configuration dialog box to examine and, if necessary,
modify your instrument configuration. The Configurable Modules panel
contains a list of all modules available for configuration. The Selected
Modules panel contains the list of configured modules.
Auto Configuration: Under Communication settings, select either the Host Name
option or the IP address option and enter the appropriate value for the
host computer to enable automatic detection of the hardware
configuration. The system configures the instrument automatically with no
further manual configuration necessary.
The Quaternary Pump configuration parameters are in two sections:
• Communication
•Options
Communication: The parameters in this dialog box are detected
automatically during autoconfiguration.
• Device name,
•Type ID,
• Serial number,
• Firmware revision,
• Button Connection settings

Agilent Technologies 1290 Specifications

General

Brand	Agilent Technologies
Model	1290
Category	Laboratory Equipment
Language	English