Agilent Technologies 16900A

Preparing for Use 2
16900A, 16902A, and 16903A Service Guide 17
For first- time power up considerations and setup steps,
refer to the Installation Guide that came with your
instrument. To get the most up- to- date installation guide:
• Go to www.agilent.com.
• Search for 16900A Logic Analysis System.
• Look under Manuals and Guide.
To connect multiple frames
If you need to make time- correlated measurements with
more logic analysis channels than can be installed into a
single logic analysis system frame, you can connect multiple
16900A and 16902A frames together. Refer to the Installation
Guide that came with your instrument for Multiframe Pro
configurations. To get the most up-to- date installation guide:
• Go to www.agilent.com.
• Search for 16900A Logic Analysis System.
• Look under Manuals and Guide.
To install measurement modules
For general information on installing a measurement module
into the mainframe refer to the Installation Guide that came
with your instrument. To get the most up- to- date
installation guide:
• Go to www.agilent.com.
• Search for 16900A Logic Analysis System.
• Look under Manuals and Guide.
To clean the instrument
If the instrument requires cleaning:
1 Remove power from the instrument.
2 Clean the external surfaces of the instrument with a soft
cloth dampened with a mixture of mild detergent and
water.
3 Make sure that the instrument is completely dry before
reconnecting it to a power source.