Agilent Technologies 16900A

Replacing Assemblies 6
16900A, 16902A, and 16903A Service Guide 85
Returning Assemblies
Before shipping the logic analysis system or assemblies to
Agilent Technologies, contact your nearest Agilent
Technologies Sales Office for additional details. To locate the
sales or service office near you, go to
http://www.agilent.com/find/contactus
.
1 Write the following information on a tag and attach it to
the part to be returned.
• Name and address of owner
• Model number
• Serial number
• Description of service required or failure indications
2 Remove accessories from the logic analysis system.
Only return accessories to Agilent Technologies if they are
associated with the failure symptoms.
3 Package the logic analysis system or assemblies.
You can use either the original shipping containers, or
order materials from an Sales Office.
4 Seal the shipping container securely, and mark it
FRAGILE.
CAUTION
For protection against electrostatic discharge, package the logic
analysis system in electrostatic material.