34410A/11A/L4411A Service Guide 51
Quick Start 2
To Adjust the Carrying Handle (34410A/11A)
To adjust the position, grasp the handle by the sides and pull outward.
Then, rotate the handle to the desired position.
To Rack Mount the 34410A/11A Multimeter
You can mount the 34410A/11A in a standard 19–inch rack cabinet using
the available rack–mount kits. Instructions and mounting hardware are
included with each kit. Any Agilent
System II (half-width, 2U height)
instrument of either the 272.3 mm or the 348.3 mm depth can be rack
mounted side–by–side with the 34410A/11A. For example, a 34410A/11A
and a 34401A, or two 34410A/11As, can be mounted side–by–side, as
shown on the next page.
Bench-Top Viewing Positions
Carrying Position
To Next Page
Loading...
