108 Agilent Restricted Agilent 5110/5100 ICP-OES Service Manual
4 Removal/ Installation, Replacement and Adjustment
Gas Option
Numbers on colors represent resistor color codes and have no relevance.
5 Connect 24V power and RJ45 control cables.
6 Slide Module back into chassis and secure 4 torx screws. Reconnect gas filter ensuring
correct orientation with the arrow facing up.
Gas Option
There are 3 gas options available depending on customer requirements (Ar option, Ar, O
2
option
or Ar, O
2
, N
2
option). These options assemble into the gas module.
To Next Page
Loading...
