Agilent Technologies 8712ET Programmer's Guide

10-12 Programmer’s Guide
Menu Map with SCPI Commands
Menu Map for 8712ET/ES and 8714ET/ES
Table 10-2 BEGIN Functions, 8712ET and 8714ET (3 of 3)
1. The active measurement channel configuration determines the order of appearance
and the content of the softkey menus.
2. Option 100 (SRL and Fault Location) only.
KEYSTROKES SCPI COMMAND
BEGIN
1
, Cable
2
, (continued)
SRL, (continued)
Connector Fault SENS1:FUNC:FAULT:CONN; *WAI
SRL Cable Scan SENS[1|2]:FUNC:SRL:SCAN; *WAI
Number of Points SENS[1|2]:SWE:POIN <num>;*WAI
Autost (menu selection only)
User Begin on OFF (menu selection only)

Agilent Technologies 8712ET Specifications

General

Brand	Agilent Technologies
Model	8712ET
Category	Measuring Instruments
Language	English