Agilent Technologies 8712ET - Page 156

10-28 Programmer’s Guide
Menu Map with SCPI Commands
Menu Map for 8712ET/ES and 8714ET/ES
Table 10-10 CAL, More CAL Functions, 8712ET/ES and 8714ET/ES (3 of 4)
KEYSTROKES SCPI COMMAND
CAL, More Cal (continued)
Cal Kit (continued)
User Cal
Kit H
1
SENS:CORR:COLL:CKIT:PORT[1|2]
‘USER8,IMPLIED,IMPLIED,IMPLIED,IMPLIED’
User Cal
Kit I
1
SENS:CORR:COLL:CKIT:PORT[1|2]
‘USER9,IMPLIED,IMPLIED,IMPLIED,IMPLIED’
User Cal
Kit J
1
SENS:CORR:COLL:CKIT:PORT[1|2]
‘USER10,IMPLIED,IMPLIED,IMPLIED,IMPLIED’
Modify ( Cal Kit Type ) SENS[1|2]:CORR:CKIT:MOD[:SEL][TYPenf|
TYPenm|UD1|TYPe35mm|TYPeff|TYPe716f|
TYPe716m|UD2|TYPeapc7|UD3|4|...10]
Open: (menu selection only)
C0 SENS[1|2]:CORR:CKIT:OPEN:MOD:CZER <num>
C1 SENS[1|2]:CORR:CKIT:OPEN:MOD:CONE <num>
C2 SENS[1|2]:CORR:CKIT:OPEN:MOD:CTWO <num>
C3 SENS[1|2]:CORR:CKIT:OPEN:MOD:CTHR <num>
Delay SENS[1|2]:CORR:CKIT:OPEN:MOD:DEL <num>
Loss SENS[1|2]:CORR:CKIT:OPEN:MOD:LOSS <num>
Z0 SENS[1|2]:CORR:CKIT:OPEN:MOD:ZOFF <num>