Agilent Technologies 8712ET - Page 178

10-50 Programmer’s Guide
Menu Map with SCPI Commands
Menu Map for 8712ET/ES and 8714ET/ES
Table 10-21 MENU Functions, 8712ET/ES and 8714ET/ES (1 of 2)
1. Used with fault location measurements only.
KEYSTROKES SCPI COMMAND
MENU (hardkey entry)
Trigger (menu selection only)
Continuous ABOR;:INIT1:CONT ON;*WAI
Hold ABOR;:INIT1:CONT OFF;*WAI
Single ABOR;:INIT1:CONT OFF;:INIT1;*WAI
Trigger Source (menu selection only)
Internal TRIG:SOUR IMM;:SENS:SWE:TRIG:SOUR
IMM;*WAI
External Sweep TRIG:SOUR EXT;:SENS:SWE:TRIG:SOUR
IMM;*WAI
External Point TRIG:SOUR EXT;:SENS:SWE:TRIG:SOUR
EXT;*WAI
Number of Points (enter value,
press Enter)
SENS[1|2]:SWE:POIN <num>; *WAI
Distance
1
(menu selection only)
Start Distance (enter value,
press Enter)
SENS[1|2]:DIST:STAR <num>; *WAI
Stop Distance (enter value,
press Enter)
SENS[1|2]:DIST:STOP <num>; *WAI
Feet SENS:DIST:UNIT FEET
Meters SENS:DIST:UNIT MET