Agilent Technologies 8712ET - Page 225

Programmer’s Guide 11-27
SCPI Command Summary
SCPI Device Command Summary
Table 11-10 FORMat
SUBSYSTEM COMMANDS FORM DESCRIPTION
FORMat:BORDer <char> CHAR Specifiesa the byte order used for
GPIB data transfer — choose
NORMal or SWAPped (for
PC-compatible systems).
FORMat[:DATA] <char>[,<num>] CHAR
[,NR1]
Specifies the data format for use
during data transfer — choose
from
REAL,64|REAL,32|INTeger,16
|ASCii.