11-60 Programmer’s Guide
SCPI Command Summary
SCPI Device Command Summary
Table 11-23 SYSTem (2 of 8)
SUBSYSTEM COMMANDS FORM
DESCRIPTION
SYSTem:COMMunicate:LAN:BOOTp
:TIMeout
#1~MAX_AUTO_CAL_TIME[S]#
NR1 Sets the number of seconds the
analyzer will retry the BOOTP
requests at boot time.
SYSTem:COMMunicate:LAN:BOOTp
:TRANsfer:FILE:NAME <string>
STRING Sets the path file name of the boot
file you want to receive at boot
time.
SYSTem:COMMunicate:LAN:BOOTp
:TRANsfer:FTP:PASSword-?
<string>
command
only
Selects the password of the remote
BOOTP host.
SYSTem:COMMunicate:LAN:BOOTp
:TRANsfer:FTP:USERname
<string>
STRING Selects the user name of the
remote BOOTP host.
SYSTem:COMMunicate:LAN:BOOTp
:TRANsfer:METHod <TFTP|FTP>
NR1 Selects TFTP as the file transfer
program.
SYSTem:COMMunicate:LAN:EADDres
s?
query only
STRING
Queries the analyzer's ethernet
address.
SYSTem:COMMunicate:LAN:IPADdre
ss <string>
STRING Sets the analyzer's Internet
Protocol address.
SYSTem:COMMunicate:LAN:LOGin
:USER:ADD-? <string>,<string>
command
only
Selects the login user/password
pairs.
SYSTem:COMMunicate:LAN:LOGin
:USER:DELETE-?
<string>,<string>
command
only
Deletes the login user/password
pairs.
SYSTem:COMMunicate:LAN:LOGin
:USER:LIST:COUNt?
query only
NR1
Queries login user names.
SYSTem:COMMunicate:LAN:LOGin
:USER:LIST:NAME? #1-7
query only
STRING
Queries user name.
SYSTem:COMMunicate:LAN:NFS
:AUTHentiation:ID:GROup
#0~4.74836e+07#
NR2 Selects the NFS remote file system
for entering a Group ID.
To Next Page
Loading...
Need help?
General
