Agilent Technologies 8712ET - Page 259

Programmer’s Guide 11-61
SCPI Command Summary
SCPI Device Command Summary
Table 11-24 SYSTem (3 of 8)
SUBSYSTEM COMMANDS FORM
DESCRIPTION
SYSTem:COMMunicate:LAN:NFS
:AUTHentiation:ID:USER
#0~4.74836e+07#
NR2 Selects the NFS remote file
system for entering a User ID.
SYSTem:COMMunicate:LAN:NFS
:AUTOmount:ADD-?
<string>,<string>,<string>
command
only
Sets the mounted NFS device
to the automount device table.
SYSTem:COMMunicate:LAN:NFS
:AUTOmount:LIST:COUNt?
query only
NR1
Selects the number of NFS
devices in Automount list.
SYSTem:COMMunicate:LAN:NFS
:AUTOmount:LIST:LOCFilesys? #1-7
query only
STRING
Selects the local file system
name for an NFS device.
SYSTem:COMMunicate:LAN:NFS
:AUTOmount:LIST:REMFilesys? #1-7
query only
STRING
Queries the automount list.
SYSTem:COMMunicate:LAN:NFS
:AUTOmount:LIST:REMHost? #1-7
query only
STRING
Queries the remote host name
(or host IP address) for an NFS
device.
SYSTem:COMMunicate:LAN:NFS
:AUTOmount:REMove-? <string>
command
only
Removes device from
automount list.
SYSTem:COMMunicate:LAN:NFS
:MOUNT-?
<string>,<string>,<string>
command
only
Selects the remote host, file
system, and local system name
for an NFS device.
SYSTem:COMMunicate:LAN:NFS
:MOUNT:LIST:COUNt?
query only
NR1
Queries the number of
currently mounted NFS
devices.
SYSTem:COMMunicate:LAN:NFS
:MOUNT:LIST:LOCFilesys? #1-7
query only
STRING
Queries the local file system
name.
SYSTem:COMMunicate:LAN:NFS
:MOUNT:LIST:REMFilesys? #1-7
STRING Selects the remote host file
system name for an NFS
device.