Programmer’s Guide 11-63
SCPI Command Summary
SCPI Device Command Summary
Table 11-23 SYSTem (5 of 8)
1. For more information on errors, refer to Chapter 13, “SCPI Error Messages.”
2. A list analyzer front panel key codes is provided in Chapter 8, “Front Panel Key-
codes.”
SUBSYSTEM COMMANDS FORM
DESCRIPTION
SYSTem:COMMunicate:SERial
:TRANsmit:BAUD <num>
NR1 Sets the baud rate for hardcopy
output to a device on the serial port
— choose from
1200|2400|4800|9600|19200.
SYSTem:COMMunicate:SERial
:TRANsmit:HANDshake <char>
CHAR Sets the handshake for
communication to a hardcopy device
on the serial port — choose XON or
DTR.
SYSTem:COMMunicate:TTL:USER:
FEED <char>
CHAR Selects the function of the USER
TTL IN/OUT port on the rear panel
of the analyzer. Choose from
DEFault|KEY|SWEep.
SYSTem:DATE
<num1>,<num2>,<num3>
NR1,
NR1,
NR1
Sets the year (num1), month (num2)
and day (num3) of the real time
clock.
SYSTem:ERRor?
1
query
only
NR1,
STRING
Queries the error queue — returns
the error number and message.
SYSTem:KEY <char> command
only
Sends key names
2
which execute
the same functions as front panel
keys.
To Next Page
Loading...
