4-6
Screens
Audio
10. Meas Reset
(Meas Cntl)
Selecting Meas Reset will erase any accumulated measurements used for calculating
a final result, and re-start the measurement process for the following functions:
• HI LIMIT
• LO LIMIT
• AVG
This field resets the AF Analyzer measurements.
See Also Keys: HIGH LIMIT, LO LIMIT, AVG
11. Speaker ALC This field selects the Speaker ALC mode. ON maintains the speaker output at a
constant amplitude for audio signals of different levels. OFF allows the audio
signal/tone level to determine the speaker output.
NOTE Speaker ALC is not featured in the Agilent 8922S.
12. Speaker Vol This field turns the Speaker Volume off or directs control to the front-panel volume
control. POT selects front-panel volume control knob. OFF turns the speaker off.
NOTE Speaker Vol is not featured in the Agilent 8922S.
To Next Page
Loading...
Need help?
General
