4-48
Screens
Cell Control 2
38. Timeslot This field selects the timeslot for the traffic channel selected in the TCH Parms field.
Range 2 through 6
39. Timing Advance
(mode)
This field selects the timing advance mode.
Choices Manual allows manual setting of the MS timing advance.
When Manual is selected, the mobile station’s timing advance can
be changed by entering a number in the Timing Advance
(number) field. The mobile station’s current timing advance,
displayed in the SACCH Meas Tim Adv field, should match the
Timing Advance number.
Auto automatically calculates and sets MS timing advance.
40. Timing Advance
(number)
This field sets the MS’s timing advance.
Range 0 through 63
41. TX Level This field selects the transmit power level for the mobile station to use.
If 0 (zero) is selected then an error message may appear which recommends using
an external attenuator.
Range 0 through 19
42. Type This field selects the traffic channel type for the TCH selected in TCH Parms.
Choices FS Full rate speech.
To Next Page
Loading...
Need help?
General
