8-13
Instrument BASIC
Loading, Storing, and Running
NOTE The Test Procedure file should have a Test Library file with the same name. Refer to
the Programming and Using the TEST Subsystem for descriptions of Test Procedure
and Library files, and how these files relate to the program’s code file.
Figure 8-3 Loading a Test Procedure
Making or Deleting
Test Procedure Files
1 Select the front-panel key, and then select the Test Function field
shown by item (1), see Figure 8-4 on page 8-14.
2 Select Proc Mngr shown by item (2), see Figure 8-4 on page 8-14.
TESTS
To Next Page
Loading...
