Agilent Technologies 8922M User Manual

2-36
Making Measurements
If You Have Problems with a Measurement
Solution 2 - Midamble Sync
On the MEAS SYNC screen (press to gain access),
• Check the definition of the signal’s burst type (A).
• Check the Burst Sel field (B).
Check the bit pattern of your measurement
Perform a Data Bits measurement (D). An “M” will display under the
bits that are identified as the midamble bits.
MEAS SYNC
A
B
D

Agilent Technologies 8922M Specifications

General

Brand	Agilent Technologies
Model	8922M
Category	Test Equipment
Language	English