Agilent Technologies Agilent 33500 Series User Manual

Remote Interface Configuration
l Front Panel:
l Finally, toggle the first softkey to Manual and press IP Address to enter a new IP address. Enter the desired
address.
l SCPI: SYSTem:COMMunicate:LAN:IPADdress <address>
Subnet Mask
Subnetting allows the LAN administrator to subdivide a network to simplify administration and minimize network traf-
fic. The subnet mask indicates the portion of the host address used to indicate the subnet.
l Contact your LAN administrator for details.
l This setting is non-volatile; it will not be changed by power cycling or *RST.
l Front Panel:
l Finally, toggle the first softkey to Manual and press Subnet Mask to enter a new subnet mask with the numeric
keypad or knob (for example: 255.255.0.0).
l SCPI: SYSTem:COMMunicate:LAN:SMASk "<mask>"
Default Gateway
A gateway is a network device that connects networks. The default gateway setting is the IP address of such a device.
l You need not set a gateway address if using DHCP or AutoIP.
l Contact your LAN administrator for gateway details.
l This setting is non-volatile; it will not be changed by power cycling or *RST.
l Front Panel:
Agilent 33500 Series Operating and Service Guide 121

Agilent Technologies Agilent 33500 Series Specifications

General

Brand	Agilent Technologies
Model	Agilent 33500 Series
Category	Inverter
Language	English