Agilent Technologies E7401A

Chapter 5 225
Language Reference
CALCulate:MARKer Subsection
Front Panel
Access:
Marker
Span Markers Center Frequency X Position
:CALCulate:MARKer[1]|2|3|4:X:POSition:CENTer <param>
:CALCulate:MARKer[1]|2|3|4:X:POSition:CENTer?
Position the center frequency, of the designated span-type marker pair, at the
specified trace X position. Use :CALCulate:MARKer:MODE SPAN to select
span markers.
The query returns the current X position center frequency of the designated
markers.
Range: Refer to the [:SENSe]:SWEep:POINts command.
Front Panel
Access:
Marker, <active marker>, Span Pair
Span Markers Span X Position
:CALCulate:MARKer[1]|2|3|4:X:POSition:SPAN <param>
:CALCulate:MARKer[1]|2|3|4:X:POSition:SPAN?
Change the frequency span, of the designated span-type marker pair, to position
the markers at the desired trace X positions. Use :CALCulate:MARKer:MODE
SPAN to select span markers.
The query returns the current X position frequency span of the designated markers.
Range: Refer to the [:SENSe]:SWEep:POINts command.
Front Panel
Access:
Marker, <active marker>, Span Pair
Delta Pair Markers Start Frequency X Position
:CALCulate:MARKer[1]|2|3|4:X:POSition:STARt <param>
:CALCulate:MARKer[1]|2|3|4:X:POSition:STARt?
Position the left-most marker, the start (reference) frequency of the designated
band-type marker pair, at the specified trace X position. Use
:CALCulate:MARKer:MODE BAND to select band markers.
The query returns the current X position start/reference frequency of the
designated marker.
Range: Refer to the [:SENSe]:SWEep:POINts command.
Front Panel
Access:
Marker, <active marker>, Delta Pair