318 Chapter 5
Language Reference
STATus:QUEStionable Subsection
Questionable Power Negative Transition
:STATus:QUEStionable:POWer:NTRansition <integer>
:STATus:QUEStionable:POWer:NTRansition?
This command determines which bits in the Questionable Power Condition
register will set the corresponding bit in the Questionable Power Event register
when that bit has a negative transition (1 to 0). The variable <integer> is the sum of
the decimal values of the bits that you want to enable.
Factory Preset
and *RST: 0
Range: integer, 0 to 32767
Questionable Power Positive Transition
:STATus:QUEStionable:POWer:PTRansition <integer>
:STATus:QUEStionable:POWer:PTRansition?
This command determines which bits in the Questionable Power Condition
register will set the corresponding bit in the Questionable Power Event register
when that bit has a positive transition (0 to 1). The variable <integer> is the sum of
the decimal values of the bits that you want to enable.
Factory Preset
and *RST: 32767 (all 1’s)
Range: integer, 0 to 32767
Questionable Positive Transition
:STATus:QUEStionable:PTRansition <integer>
:STATus:QUEStionable:PTRansition?
This command determines which bits in the Questionable Condition register will
set the corresponding bit in the Questionable Event register when that bit has a
positive transition (0 to 1). The variable <integer> is the sum of the decimal values
of the bits that you want to enable.
Factory Preset
and *RST: 32767 (all 1’s)
Range: integer, 0 to 32767
To Next Page
Loading...
