286 Chapter 5
Language Reference
[:SENSe]:DETector Subsection
EMI View
[:SENSe]:DETector[:FUNCtion]EMI:VIEW POSitive|EMI
[:SENSe]:DETector[:FUNCtion]EMI:VIEW?
Selects between Quasi-Peak/Average EMI detector mode or Peak detector mode
without reranging. When POSitive is selected only the peak detector is used. When
EMI is selected, the previously selected EMI detector is used.
Factory Preset
and *RST: EMI
Remarks: This command is not available when the EMI detector is Off.
Key Access:
Det/Demod, EMI Detector, View
Range Immediate
[:SENSe]:DETector:RANGe:IMMediate
[:SENSe]:DETector:RANGe:IMMediate
Performs detector ranging (if enabled) when an EMI detector is selected.
Factory Preset
and *RST: Positive
Unrange
[:SENSe]:DETector[:UNRange]
Restores settings prior to last range operation.
To Next Page
Loading...
