To Next Page

To Previous Page

262 Chapter 5

Language Reference

MMEMory Subsystem

Load an Instrument State from a File

:MMEMory:LOAD:STATe 1,<file_name>

The contents of the state file are loaded into the current instrument state.

Example: :MMEM:LOAD:STAT 1,“C:mystate.sta”

Remarks: See also commands :MMEMory:LOAD:STATe and

:MMEMory:STORe:STATe

If the revision of the state being loaded is newer than the

revision of the instrument, no state is recalled and an error is

reported.

If the revision of the state being loaded is equal to the revision of

the instrument, all regions of the state will be loaded.

If the revision of the state being loaded is older than the revision

of the instrument, the instrument will only load the older regions

of the state.

Front Panel

Access:

File, Load, Type, State

Load a Trace From a File to the Instrument

:MMEMory:LOAD:TRACe <file_name>

The contents of the file are loaded into TRACE1. The file name must have a file

extension of :trc or :csv. The file extension determines whether a trace is loaded,

or a trace with its state, are loaded. The :csv extension is for trace files using the

CSV (comma-separated values) format. The :trc extension is for files that include

both trace and state data.

Example: :MMEM:LOAD:TRAC “C:mytrace.trc”