Chapter 5 317
Language Reference
STATus:QUEStionable Subsection
Questionable Negative Transition
:STATus:QUEStionable:NTRansition <integer>
:STATus:QUEStionable:NTRansition?
This command determines which bits in the Questionable Condition register will
set the corresponding bit in the Questionable Event register when that bit has a
negative transition (1 to 0). The variable <integer> is the sum of the decimal values
of the bits that you want to enable.
Factory Preset
and *RST: 0
Range: integer, 0 to 32767
Questionable Power Condition
:STATus:QUEStionable:POWer:CONDition?
This query returns the decimal value of the sum of the bits in the Questionable
Power Condition register.
NOTE The data in this register is continuously updated and reflects the current conditions.
Questionable Power Enable
:STATus:QUEStionable:POWer:ENABle <integer>
:STATus:QUEStionable:POWer:ENABle?>
This command determines which bits in the Questionable Power Condition
Register will set bits in the Questionable Power Event register, which also sets the
Power Summary bit (bit 3) in the Questionable Register. The variable <integer> is
the sum of the decimal values of the bits you want to enable.
Factory Preset
and *RST: 32767 (all 1’s)
Range: integer, 0 to 32767
Questionable Power Event Query
:STATus:QUEStionable:POWer[:EVENt]?
This query returns the decimal value of the sum of the bits in the Questionable
Power Event register.
NOTE The register requires that the equivalent PTR or NTR filters be set before a
condition register bit can set a bit in the event register.
The data in this register is latched until it is queried. Once queried, the data is
cleared.
To Next Page
Loading...
Need help?
General
