Chapter 5 287
Language Reference
[:SENSe]:EMI Subsection
[:SENSe]:EMI Subsection
Auto Measure Average On or Off
[:SENSe]:EMI:MEASure:DETector:AVERage[STATe] OFF|ON|0|1
[:SENSe]:EMI:MEASure:DETector:AVERage?
Sets auto measure On or Off.
Factory Preset
and *RST: Off
Remarks: Determines if the average detector is measured (by auto
measure, measure at marker, measure frequency, or remeasure).
Key Access:
MEASURE, More, Auto Measure
Auto Measure Peak On or Off
[:SENSe]:EMI:MEASure:DETector:PPEak[STATe]OFF|ON|0|1|
[:SENSe]:EMI:MEASure:DETector:PPEak?
Sets automeasure peak On or Off.
Factory Preset
and *RST: Off
Remarks: Determines if the peak detector is measured (by auto measure,
measure at marker, measure frequency, or remeasure).
Key Access:
MEASURE, More, Auto Measure
Auto Measure Quasi Peak On or Off
[:SENSe]:EMI:MEASure:DETector:QPEak[STATe]OFF|ON|0|1|
[:SENSe]:EMI:MEASure:DETector:QPEak?
Sets automeasure quasi peak On or Off.
Factory Preset
and *RST: Off
Remarks: Determines if the quasi-peak detector is measured (by auto
measure, measure at marker, measure frequency, or remeasure).
Key Access:
MEASURE, More, Auto Measure
To Next Page
Loading...
