Agilent Technologies E8257C User Manual

3-24
Replaceable Parts
Assemblies and Hardware Options
Hardware
This section lists part numbers for hardware and other instrument parts in your signal generator.
• “Front Panel View” on page 3-25
• “Disassembled Front Panel View” on page 3-27
• “Disassembled Rear Panel View” on page 3-29
• “Disassembled A32 10 MHz Crystal Oscillator (Option UNR)” on page 3-32
• “Disassembled Rear Panel View” on page 3-29
• “Disassembled AT1 115 dB Attenuator View (Option 1E1)” on page 3-34
• “Disassembled A24 20 GHz Highband Coupler and A25B Highband Detector Bias Board” on
page 3-35
• “Disassembled A24 40GHz Highband Coupler and A25B Highband Detector Bias Board” on
page 3-36
• “Microcircuit Interface Deck Top View” on page 3-37
• “Main Chassis and MID Bottom View” on page 3-39
• “2.4 mm RF Output Connector (Option 540 Only)” on page 3-42
• “APC 3.5 RF Output Connector (Option 520 Only)” on page 3-43
• “Type-N RF Output Connector (Option 1ED Models Only)” on page 3-44
• “Main Chassis with Inside Cover and Right-Side Support Wall” on page 3-45
• “Outer and Inner Instrument Covers and Associated Parts” on page 3-46

Agilent Technologies E8257C Specifications

General

Brand	Agilent Technologies
Model	E8257C
Category	Portable Generator
Language	English