Agilent N5181A/82A MXG Signal Generators User’s Guide 129
9 Adding Real Time Noise to a Signal (Option 403)
Before using this information, you should be familiar with the basic operation of the signal generator.
If you are not comfortable with functions such as setting the power level and frequency, refer to
Chapter 3, “Basic Operation,” on page 23 and familiarize yourself with the information in that
chapter.
This chapter contains examples of using the additive white gaussian noise (AWGN) waveform
generator, which is available only in vector signal generators with Option 403.
• “Adding Real- Time Noise to a Dual ARB Waveform” on page 130
• “Using Real Time I/Q Baseband AWGN” on page 132
To Next Page
Loading...
Need help?
General
