Agilent N5181A/82A MXG Signal Generators User’s Guide 53
5 Using Analog Modulation (Option UNT Only)
Before using this information, you should be familiar with the basic operation of the signal generator.
If you are not comfortable with functions such as setting the power level and frequency, refer to
Chapter 3, “Basic Operation,” on page 23 and familiarize yourself with the information in that
chapter.
• The Basic Procedure on page 54
• Using an External Modulation Source on page 55
• Removing a DC Offset on page 55
Figure 5-1 Analog Modulation Softkeys
See
page 55
See
page 55
See
page 55
or details on each key, use key help
s described on see page 23.
To Next Page
Loading...
Need help?
General
