Agilent Technologies N5182A User Manual

16 Agilent N5181A/82A MXG Signal Generators User’s Guide
Setting Preferences & Enabling Options
User Preferences
User Preferences
From the Utility menu, you can set the following user preferences:
• Display Settings, below
• Power On and Preset on page 17
• Front Panel Knob Resolution on page 17
Display Settings
NOTE With both brightness and contrast set to minimum, the display may be too dark to see the
softkeys. If this happens, use the figure above to locate the brightness and contrast softkeys
and adjust their values so that you can see the display.
Range: 15—100
Range: 35—55
Range: 1—12 hours, in 1 hour increments
Light Only: turns the display light off, leaving the text visible at a low intensity.
Light & Text: turns the display light and the text off.
If the display remains unchanged for long periods of time, use this mode to
prevent the text from burning the display.
When on, commands executed through
the remote control bus update the signal
generator display accordingly.
Bright without col
or
Utility > Display >
See also, Using the Secure Display (Option 006 Only) on page
For details on each key, use key help
as described on page 23.
page 137
Dark text on a ligh
t
background.
Light text on a dar
k
background.

Agilent Technologies N5182A Specifications

General

Brand	Agilent Technologies
Model	N5182A
Category	Portable Generator
Language	English