Chapter 3: Installation
VSpin User Guide
38
3. Change the settings on the profiles page to suit your application.
For a list of settings on the Profiles page, see “About Profiles” on
page 12.
4. To save the changes to the profile, click
Apply in the lower right
corner of the
VSpin Control dialog box.
The profile is updated.
Deleting a Profile Delete a profile if you no longer need it.
To delete a profile:
1. Click the Profiles tab at the top left of the VSpin Control dialog box.
The
Profiles page opens.
2. Select the profile you want to delete from the selection box in the
Current VSpin Profile group box.
3. Click
Delete profile.
A confirmation dialog box opens, asking if you are sure you want to
delete the profile.
4. To delete the profile, click
Yes.
The profile is deleted.
Copying a Profile Copy a profile to quickly reproduce the settings from a profile that
already has most of the settings you need for your application. You can
then change the one or two settings that need to be different, and save
them as a new profile.
For example, if you want to spin two types of samples on one VSpin and
you want to set them up the same way, except for the maximum velocity,
you could set up a profile for the first sample type, copy the profile and
then modify the maximum velocity setting for the second sample type.
This is faster than making an entirely new profile.
To copy a profile:
1. Click the
Profiles tab at the top left of the VSpin Control dialog box.
The
Profiles page opens.
2. Select the profile you want to copy from the selection box in the
Current VSpin Profile group box.
3. Click
Copy profile.
The
Copy Profile dialog box opens.
To Next Page
Loading...
Need help?
General
