114
Settings and Adjustments
Configure on the device.
4
How to configure absent transfer
(1) Tap [Absent Transfer] on the Transfer Settings screen.
– The Absent Transfer Settings screen is displayed.
(2) Tap [NEW] to configure the transfer destination station.
To configure a retransfer destination, tap the Re row and then tap [EDIT].
*Up to 10 transfer destinations and a single retransfer (i.e. transfer a transferred call) destination can be
configured.
*Configure transfer destinations in the 1-10 fields in the No. column on the left of the transfer destination
station list, and the retransfer destination in Re.
– To change a transfer destination station that has already been registered, tap the station to change, and
then tap [EDIT].
– To delete a transfer destination station that has already been registered, tap the station to delete, and then
tap [DELETE].
– The Select Destination screen is displayed.
(3) Tap the station to configure as a transfer destination.
*Refer to “Searching and Specifying (→page 31)” to search stations.
(4) Tap [ENTER].
– The Absent Transfer Settings screen is displayed.
(5) Tap [SELECT].
– The settings are saved.
Important
• Do not configure multiple VoIP phones as transfer destinations. If multiple VoIP phones are configured, calls will be transferred
to only one VoIP phone.
To Next Page
Loading...
Need help?
General
