25
Before you start using the
device
Setting the date and time
2
Setting the date and time
The date and time are used for video/audio recording and the incoming/outgoing call history. Be sure to set them
correctly. When the station is synchronized with an NTP server for date and time, you do not have to set them up.
Initial value: January 1, 2018 09:00
1.
Tap [Settings] on the Home
screen.
2. Tap [User].
3. Tap [Station].
4. Tap [Date and Time].
5. Set up [DATE] and [TIME].
• If the time zone will be configured, first
configure the time zone.
6. Tap [BACK].
• The configured date and time will be applied to
this station.
Note
• An error up to ±1 minute per month may occur normally.
We recommend regular adjustment of time.
• If the power is turned off for at least 30 minutes in an event
such as a power outage, the date and time will revert back
to the initial setting. If this occurs, configure the date and
time again.
• If nothing is pressed for approximately one minute, the
station will return to the Home screen.
• If the date and time are changed, it may take some time for
the setting to be updated.
To Next Page
Loading...
Need help?
General
