59
How to use the device
Using Speed Dial Buttons
3
Using Speed Dial Buttons
The Speed Dial buttons can be used to quickly perform functions that have been pre-assigned.
This function can be configured in
“Speed Dial (→page 145)”.
Home screen 1
Tap [Favorites] on the Home screen to display the Speed Dial
buttons.
Home screen 2
The Speed Dial buttons are displayed on the Home screen.
Function icon
Description
Home screen 1 Home screen 2
Press this to make a normal call to a pre-configured station or group.
Press this to make a priority call to a pre-configured station or group.
Press this to make an urgent call to a pre-configured station or group.
Press this to send a normal page, normal message page, normal all page, or normal
all message page to a pre-configured group.
Press this to send an urgent page, urgent message page, urgent all page, or urgent
all message page to a pre-configured group.
Press this to monitor a pre-configured station or network camera.
Press this to scan monitor a pre-configured station or network camera.
Press this to operate relay output for the pre-configured station. During relay control,
[Processing…] will be displayed and the button will turn yellow.
However, the display and operating state may vary in the following situations.
• Relay output is operated on another station
• The station to control is reset during relay output control
When operating relay output for multiple stations at the same time, processing may
take some time.
Note
• A VoIP Phone cannot be paged, message paged, monitored, or scan monitored.
Function icon
Speed Dial button name
Function icon
Speed Dial button name
To Next Page
Loading...
Need help?
General
