125
Settings and Adjustments
Configure on the device.
4
How to configure scan monitoring
(1) Tap [Scan Monitor Settings] on the Monitor Settings screen.
– The Scan Monitor Settings screen is displayed.
(2) Tap [NEW] and then configure the stations and network cameras for which to perform scan monitoring.
– To change a scan monitoring station or network that has already been registered, tap the station to
change, and then tap [EDIT].
– To delete a scan monitoring station or network that has already been registered, tap the station to delete,
and then tap [DELETE].
– The Scan Monitor Stations screen is displayed.
(3) Tap the stations and network cameras for which to perform scan monitoring.
– Refer to
“Searching and Specifying (→page 31)” to search stations.
(4) Tap [ENTER].
– The Scan Monitor Settings screen is displayed.
(5) Tap [SELECT].
– The settings are saved.
To Next Page
Loading...
