AIRTRONICS MT-S - Aux Menu Overview

31
TR
MT- S
2.4GHZ FH4T RADIO SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
Section Continued on Next Page
TH TYPE MENU
[
Throttle Type
]
FUNC MENU

TRIM, ANTILOCK BRAKE, THROTTLE OFFSET AND THROTTLE TYPE

SETTING
Selecting the Menu and Channel:
1) From within the SETTING menu, press the UP or DOWN keys to highlight the FUNC
menu. FUNC ST TRIM 0 will be highlighted.
If the cursor is flashing over Channel/Options, press the ENTER key to stop the
cursor flashing, then press the UP or DOWN keys to select the FUNC menu.
2) Press the BACK key so that the cursor is flashing over Channel/Options.
3) Press the UP or DOWN keys to highlight the Throttle channel, then press the ENTER key.
Changing the Throttle Type Value:
1) PresstheDOWNkeytohighlightTHTYPEF7:B3.
2) Press the ENTER key, then press the UP or DOWN keys to choose the desired
Throttle Type value.
FUNCTHTYPEsettingrangeisF7:B3andF5:B5.ThedefaultsettingisF7:B3.
3) Press the ENTER key. Either Set to F70:B30? NO/YES will be displayed or Set to
F50:B50?NO/YESwillbedisplayed.Pressthe UPorDOWNkeystohighlightYES,
then press the ENTER key.
If you want to go back and change the Throttle Type or if you don't want to
change the Throttle Type for any reason, choose NO or press the BACK key.
STEP
POINT
4WS
MOA
AUX MIX
CODE
PG. 32
PG. 33
PG. 35
PG. 37
PG. 39
PG. 40
MENU
PAGE #
MENU DESCRIPTION
Program Step Values That the Auxiliary Servo Travels
Program Specific Points That the Auxiliary Servo Travels
Program Four Wheel Steering Options
Program Dual Throttle Options (Dig and Burn)
Program Auxiliary 1 (Channel 3) and Auxiliary 2 (Channel 4) Mixing Options
Program CODE Auxiliary Options to Control SSL Accessories (Super Vortex ZERO, etc.)
The following Programming Menus are available within the AUX menu:
To access the various AUX menu Programming Menus, turn the transmitter ON,
then press the ENTER key to open the PROGRAMMING screen.
Press the UP or DOWN keys to highlight the AUX menu, then press the ENTER
key to open the AUX menu.
AUX MENU OVERVIEW AUX
AUX MENU