AIRTRONICS MT-S - Buzzer Menu (Audible Key Tones); Battery Menu

60
MT- S
2.4GHZ FH4T RADIO SYSTEM USER'S GUIDE
TR
Telemetry System with Sanwa Synchronized Link Support
Section Continued on Next Page
KEY ASSIGN MENU

KEY ASSIGNMENTS

SYSTEM
Changing the Trim Switch Direction of Travel:
The direction that the Trim Switches move the servos or function parameter values can be changed from Normal to Reverse. In
Normal mode, the Trim Switches will move the servos toward the High Side or Increase function values when the Trim Switches
are pushed Forward. In Reverse mode, the Trim Switches will move the servos toward the Low Side or Decrease function
values when the Trim Switches are pushed Forward.
1) FromwithintheKEYASSIGNTRMmenu,presstheUPorDOWNkeystohighlighttheTrimSwitchNumberyouwouldlike
to change the Reverse value for. Choose from TR1 REV, TR2 REV or TR3 REV.
2) Press the ENTER key, then press the UP or DOWN keys to choose the desired Trim
Switch Reverse value.
3) Press the ENTER key, then repeat step 2 to change any other desired Trim Switch
Reverse values.
KEYASSIGNSWREVsettingrangeisNORandREV.ThedefaultsettingforallTrim
Switches is NOR.
BUZZER MENU

AUDIBLE KEY TONES

SYSTEM
The Buzzer function allows you to change the Volume and Tone of the audible sounds that are made when you use the Trim
Switches, Auxiliary Switches and the Timer function. The Volume can be Increased or Decreased (or Muted) and the Tone can
be changed to suit your preference.
Changes made using the Buzzer function also affect audible sounds that are part of the Timer function. For example, if
you Mute (select OFF) the Audible Key Tones, the sounds that are part of the Timer
function will also be Muted. Transmitter warning alarms, such as the Low Voltage Alert
alarm, are unaffected.
Changing the Audible Key Tone Volume:
1) FromwithintheSYSTEMmenu,presstheUPorDOWNkeystohighlighttheBUZZER
menu.
2) Press the ENTER key to open the BUZZER menu. VOLUME 4 will be highlighted.
3) Press the ENTER key, then press the UP or DOWN keys to choose the desired Volume
value. Increasing the Volume value will Increase the Volume of the Audible Key
Tones and Decreasing the Volume value will Decrease the Volume of the Audible
Key Tones. Choosing OFF will Mute Audible Key Tones.
BUZZER VOLUME setting range is OFF to 5. The default setting is 4. When OFF is selected, Audible Key Tones will be Muted.
Changing the Audible Key Tone:
1) From within the BUZZER menu, press the UP or DOWN keys to highlight TONE 1.
2) Press the ENTER key, then press the UP or DOWN keys to choose the desired Tone
value. Increasing the Tone value will Increase the pitch of the Audible Key Tones and
Decreasing the Tone value will Decrease the pitch of the Audible Key Tones.
BUZZER TONE setting range is 1 to 7. The default setting is 1.
BATTERY MENU

TRANSMITTER LOW VOLTAGE ALERT AND LIMIT ALARMS

SYSTEM
The Battery function allows to specify the voltage at which the transmitter Low Voltage Alert and Low Voltage Limit alarms
will sound. Presets for different battery types allow you to quickly and easily choose the recommended values to use, based
on the type of transmitter battery you're using. For example, if you're using 4 'AA' Alkaline cells or a 2S LiPo battery pack, you
canchoosetheDRYx4ortheLiPox2BatteryTypeoptionrespectively,andtheAlert Voltage and Limit Voltage values will be
automaticallyadjustedtosuit.YouarealsoabletoprogramCustomAlertVoltageandLimitVoltagevaluesifyouprefernotto
use one of the Battery Type Presets.