AIRTRONICS MT-S - INT Menu (Interval Timer)

48
MT- S
2.4GHZ FH4T RADIO SYSTEM USER'S GUIDE
TR
Telemetry System with Sanwa Synchronized Link Support
Section Continued on Next Page
INT MENU

INTERVAL TIMER

TIMER
The Interval Timer (Target Time) function notifies you when a set Interval elapses while you are driving, giving you an idea of
how close you are to your Target Time. An Alarm (Goal Time) is featured that will sound when you reach your Goal Time. When
the Interval Time is reached, an audible Double-Tone will sound, then the Interval Timer will Reset and begin counting Up again
from zero.
Setting the Interval Timer (Target Time):
1) Following the steps in the Changing the Timer Type section on page 46, choose the
TYPEINToption.
2) From within the TIMER menu, press the UP or DOWN keys to highlight INT --.
3) Press the ENTER key, then press the UP or DOWN keys to set the desired Interval
Timer Minutes value.
TIMER SET INT setting range is --:-- . -- to 99:59.99. The default setting is --:-- . -- (OFF). When the Interval Timer is started, an
audible double-tone will sound each time the Interval Timer reaches the Interval Timer (Target Time) value. For example,
if you set the Interval Timer for 01:00.00, an audible double-tone will sound every 1 minute.
5) To set the Interval Timer 1/100th Seconds value, press the ENTER key, then press the
DOWN key to highlight 00. Press the ENTER key a second time, then press the UP
or DOWN keys to set the desired Interval Timer 1/100th Seconds value.
4) To set the Interval Timer Seconds value, press the ENTER key, then press the DOWN key to highlight 00. Press the ENTER
key a second time, then press the UP or DOWN keys to set the desired Interval Timer Seconds value.
Setting the Alarm (Goal Time):
1) From within the TIMER menu, press the DOWN key to highlight ALRM 05.
2) Press the ENTER key, then press the UP or DOWN keys to set the desired Alarm
Minutes value.
3) To set the Alarm Seconds value, press the ENTER key, then press the DOWN key to
highlight 00. Press the ENTER key a second time, then press the UP or DOWN keys
to set the desired Alarm Seconds value.
TIMER SET ALRM setting range is 00:00 to 99:59. The default setting is 5:00 minutes. An audible tone will sound in 1 second
intervals 5 seconds before reaching the Goal Time. When the Goal Time is reached, a long audible tone will sound.
Choosing the Key Option (Key Assign Function):
Inthedefaultconfiguration,theTimerfunctioniscontrolledbyAuxiliarySwitchSw1.TheKeyoptionisashortcuttotheKEY
ASSIGN menu, which allows you to Assign the Timer function to Auxiliary Switch Sw1 if another function has been Assigned to
it. The Timer function can only be Assigned to Auxiliary Switch Sw1.
1) PresstheENTERkey,thenpresstheUPorDOWNkeystohighlightKEY.
2) PresstheENTERkeytoopentheKEYASSIGNmenu,thenAssignTIMERtoAuxiliary
SwitchSw1.Formoreinformation,seetheKEYASSIGNMenusectiononpages56
through 60.