10
AIRZONE CONTROL GATEWAY – 3 SPEEDS FANCOIL (AZX6FANCOILZ)
Control gateway for air-to-water air conditioners. Control up to three fan-speeds and
opening/closing of electro-valves. Compatible with 2 or 4-pipe air conditioners. Externally
powered. Mounted on DIN rail or on wall.
Functionalities:
• Two electro-valve control relays for demand.
• Three control relays for fan-speed selection.
• Automatic fan speed selection based on the number of zones where there is demand.
AIRZONE CONTROL GATEWAY FOR ELECTROMECHANICAL UNITS (AZX6ELECTROMEC)
Control gateway for air-conditioning units with electromechanical control. Management of
up to two compressors in 1 stage (balanced) or 2 stages. Powered through AC unit bus.
Mounted on DIN rail or on wall.
Functionalities:
• Relay for fan control.
• Relay to control up to two compressors.
• Relays to control heating/cooling modes.
• Relay for boiler control.
• Two Airzone probe inputs for protection of production units.
AIRZONE CLOUD WEBSERVER ETHERNET/WI-FI (AZX6WEBSCLOUD [C/R])
Webserver for controlling systems through Airzone Cloud platform. Accessible through browser or app (available for IOS and
Android). Connection via router (AZX6WEBSCLOUDC) or Wi-Fi (AZX6WEBSCLOUDR). Powered through domotic bus.
Functionalities:
• Control of up to 32 systems.
• Configuration and control of zone parameters (Room and set-point temperature, operating mode, etc.) and system
settings via Airzone Cloud.
• Temperature and operating mode time schedules.
• Multi-user and multi-session.
• External control through Airzone Cloud platform.
• Remote updates of the Webserver firmware and the systems connected to it.
• Remote error detection and error resolution.
To Next Page
Loading...
Need help?
General
