Airzone FLEXA 3.0 IBPRO6 Assembly Instructions

50
• Offset. Allows you to correct ambient temperature that is measured in the various areas or in all of them, due to
deviations by sources of heat/cold nearby, with a correction factor between - 2,5°C and 2,5°C in steps of 0,5°C. It is in
0°C by default.
• Reset thermostat (not available in remote zones). Resets the thermostat returning to Setup menu (see section Zone
Configuration menu - Blueface Thermostat).
SELF-DIAGNOSE
AIRZONE MAIN CONTROL BOARD (AZCE6FLEXA3 / AZCE6IBPRO6)
Airzone main control boards have integrated LEDs that detect unusual operations.
Meaning
D1
Data reception from automation bus
Blinking
Green
D2
Data transmission from automation bus
Blinking
Red
D3
Main control board activity
Blinking
Green
D4
Data transmission from Airzone connection bus
Blinking
Red
D5
Data reception from Airzone connection bus
Blinking
Green
D6
AC unit On/Off
Blinking
Green
D7
CMV/Boiler
Blinking
Green
D8
Data transmission from AC unit bus
Blinking
Red
D9
Data reception from AC unit bus
Blinking
Green
D10
Wireless data packets reception
Switches
Green
D11
Main control board power supply
Solid
Red
D18
Associated element
Solid
Green
D19
Association channel: active
Solid
Red
D36
…
D47
Open dampers
On
Green
Close dampers On Red

Airzone FLEXA 3.0 IBPRO6 Specifications

General

Brand	Airzone
Model	FLEXA 3.0 IBPRO6
Category	Thermostat
Language	English