Airzone FLEXA 3.0 IBPRO6 Assembly Instructions

23
WIRELESS AIRZONE THERMOSTATS (AZCE6THINKR / AZCE6LITER)
Assembly
Wireless thermostats are mounted on the wall through a support. It is recommended not to locate it more than 40 meters away
from the main control board.
To fix it to the wall, follow these steps (Fig. 24):
• Remove the back of the thermostat and insert the CR2450 button battery.
• Fix the back part of the thermostat to the wall.
• Place the display on the support once it is fixed.
• Place the anti-theft rods for additional support.
Changing batteries
When a Think thermostat is running out of battery, it displays this icon on the screensaver (Fig. 25). In the case of wireless
Lite thermostats, a warning message will be displayed on the Blueface. In order to know the zone of the Lite thermostat(s)
running out of battery press on the warning icon (Fig. 26).
Fig. 25 Fig. 26
To replace the battery, separate the thermostat from its support and replace the battery (CR2450) (Fig. 27).
Fig. 27
Important: We recommend using of top-brand batteries. Using low-quality batteries may reduce the duration of use.
Remember to deposit the old battery into an appropriate recycling point.
Note: Do not forget to remove the security system before taking away the thermostat from the wall.
Fig. 24

Airzone FLEXA 3.0 IBPRO6 Specifications

General

Brand	Airzone
Model	FLEXA 3.0 IBPRO6
Category	Thermostat
Language	English