Airzone FLEXA 3.0 IBPRO6 Assembly Instructions

42
Associated outputs
If necessary, the system allows you to associate more than one control output to a zone. It is possible to control multiple outputs
from the same thermostat.
Thermostat configuration
Select the operation of the thermostat:
- Master: Controls all the parameters of the installation.
- Zone: Controls all the parameters of the zone.
Control stages (only available in installations with AZDI6OUTPUT8 modules)
Select the stages to be controlled: Air, Radiant or Combined.
Other settings
Press to finish the initial setup process, or access the advanced settings (system address, control stages, etc.) to change any
other settings. Activate the basic function if required (see Advanced Settings, Zone settings
).
Blueface

Airzone FLEXA 3.0 IBPRO6 Specifications

General

Brand	Airzone
Model	FLEXA 3.0 IBPRO6
Category	Thermostat
Language	English