Click the temperature figure or air-conditioning mode icon again on the air-conditioning control interface
and the air-conditioning control interface will exit.
Temperature adjustment: Slide once and the temperature will rise or fall by 0.5℃; slide and hold to
continuously adjust the temperature.
Air volume adjustment: 1/2/3/4/5/6/7 levels are available; click “+” to increase the air volume or click “-”
to reduce the air volume. You can also drag the fan icon in the middle to adjust the air volume.
Internal/external circulation regulation: When the air conditioner is working, the external circulation mode
is selected by default. Touch the “Internal circulation mode” icon to switch the air conditioner to internal
circulation mode.
Automatic air conditioning: Click the “Auto” icon to enable the automatic air conditioning mode. In this
mode, your car will automatically adjust the air-conditioning temperature, air volume, wind direction and
internal/external circulation mode on the driver and front passenger sides according to the temperature
you set. Click the “Auto” button again to exit the automatic air conditioning mode. Your car will keep the
current air-conditioning status.
Dual-area climate: Click the “Dual” icon to enable the dual-area air-conditioning mode. In this case, the
front passenger can adjust the temperature on their side as desired without affecting the temperature on
the driver side.
Air flow direction: Click the direction arrow to regulate the air flow manually.
Air-conditioning compressor switch: Click the “AC” icon to enable the air-conditioning compressor and use
its cooling function. Click again to turn off the air-conditioning compressor and disable the cooling
function; this will keep the air vent direction unchanged and blow natural air.
Front windshield defog: Click the button
to defrost or defog the front windshield.
Rear windshield heating: Click the button
to defrost or dry the rear windshield.
AIWAYS U5 | 83
To Next Page
Loading...
