Page 89
Chapter 4: Editing Sequence
• The Value field:
This field works in conjunction with the Do field and sets the
number that will be used to change the velocities or durations.
• The <Do it> soft key:
Pressing this soft key performs the edit specified in the above fields.
Editing Note Number Assignment of Drum Note Events
This feature affects Drum tracks only. It is used to change all notes
of one drum to that of another drum. It does this by searching for all
drum notes of the specified note number and changing them to
another note number assignment. To change the note number
assignment of a group of notes, select 2 (Edit note number
assignment
) from the Edit Note Data menu; the following screen
will appear:
===== Edit Note Number Assignment ======
Seqnc: 1-Seqnc_name
Track: 1-Track_name
Ticks:001.01.00-001.01.00
Change notes:64/A01-Sound_name
To notes:65/A07-Sound_name
========================================
<Do it>
The fields and soft keys are:
• The Seqnc field:
This specifies the sequence to be edited.
• The Track field:
This specifies the track to be edited. Only one track can be edited at
a time. Since this function only works on Drum tracks, if a MIDI
track is selected the message “You must select a drums track” will
appear.
• The Ticks fields:
These two bar.beat.tick fields are used to determine the region
within the track that will be edited. The leftmost field sets the start
of the region and the rightmost field holds a location that is one tick
after the region to be edited.
• The Change notes field:
This field is used to determine which drum notes will be affected.
While the cursor is in this field, press the pad of the drum notes to
be changed—its currently assigned note number and sound will
appear in the field. (You can also send a Note On message to the
MIDI input or enter the note number directly.) Only drum notes
assigned to this note number will be changed.
To Next Page
Loading...
Need help?
General
