Page 86
Chapter 4: Editing Sequence
of 0 to 127; the equivalent note name (C-2 to G8) is shown
to the right of each field. Alternately, these fields can be
set by pressing two notes on the MIDI input device’s
keyboard. The fields will automatically be set to the
lowest and highest keys pressed.
2. If the source track is a Drum track, this field is used to
select specific drum notes, represented as MIDI note
numbers, that are to be copied. It cannot be accessed with
the cursor; notes can only be entered by pressing pads or
via the reception of external MIDI notes. When the
screen is first displayed, it contains the word ALL (shift
all notes) and the text (Hit pads) to the right. When
a pad is pressed, the pad’s currently assigned note
number appears in the field, followed by the pad number
and currently assigned sound name. On the right side of
the line is the text ( 1 pad ) indicating that one pad
is selected for shifting:
Notes:36/A02-SNARE_DRUM ( 1 pad )
If another pad is then pressed, its note number, pad
number, and assigned sound are displayed instead, and
the text to the right displays ( 2 pads). This contin-
ues until the user has selected all of the pads he or she
intends to shift.
• The Dir (direction) field:
This choice field is used to determine the direction of shift and has
two options: EARLIER and LATER.
• The Amount field:
This field is used to determine the amount of shift in ticks.
• The <Do it> soft key:
Pressing this soft key performs the shift specified in the above
fields.
Global Editing of Note Event Data
If option 9 (Edit note data) is selected from the SEQ EDIT key
menu, the following menu, which contains three choices for editing
note data, appears:
To Next Page
Loading...
Need help?
General
