Page 167
Chapter 9: Saving to and Loading from Disk
• The Free field:
This shows the amount of free space on disk.
• The <Do it> soft key:
Pressing this soft key saves the selected sequence to disk.
• The <Select disk> soft key:
This soft key only appears if a hard disk is connected to the SCSI
port. It is used to change the active disk device from the floppy drive
to one of the hard disk partitions or vice versa. Pressing <Select
disk>
causes this screen to appear:
============== Select Disk =============
Select disk, then press <Select it> to
return to previous screen.
Disk:HARD DISK PART A
========================================
<Select it>
To select a different disk device, select it in the Disk field, then
press <Select it>. The options are:
FLOPPY DISK
HARD DISK PART A
HARD DISK PART B
HARD DISK PART C
(and other hard disk partitions if they exist)
When <Select it> is pressed, the previous screen will be
redisplayed and the selected disk drive will be active.
Saving an ALL File (All Sequences and Songs)
To save a single file that contains all 99 sequences and 20 songs,
select 2 (All seqs & songs) from the DISK key menu. The
following screen will appear:
========= Save All Seqs & Songs ========
File name:All_file_name Size: 0K
Disk:HARD DISK PART A Free:27793K
========================================
<Do it> <Select disk>
To Next Page
Loading...
Need help?
General
