Akai MPC 3000

Page 220
Appendix
Technical Specifications
General
• Display: 320 character (240 x 64 dot graphic) LCD
• Disk drive: 3.5 inch HD (1.44MB formatted)
• CPU: V53 @ 16MHz
• Dimensions: 440(W) x 121(H) x 405(D) mm
• Weight: 9 kg
• Power requirements: 120 VAC 60Hz 40W
220-240 VAC 50Hz
Sound Generator
• Sampling rate: 44.1kHz (frequency response: 20Hz-20kHz)
• Sampling capacity: 2MB standard (21.9 seconds mono or 10.9
seconds stereo), expandable to 16MB (188.3 seconds mono or 94.1
seconds stereo).
• Data format: 16-bit linear
• Dynamic filtering: 12 dB/Octave dynamic resonant lowpass filter
per voice
• Maximum sounds in memory: 128
• Number of sound programs: 24
• Sound assignments per program: 64
• Simultaneous voices: 32
Sequencer
• Maximum notes: 75,000
• Resolution: 96 parts per 1/4-note (ppq)
• Sequences: 99
• Tracks per sequence: 99
• MIDI output channels: 64 (16 channels x 4 output ports)
• Song mode: 20 songs, 250 steps per song
• Drum pads: 16 (velocity and pressure sensitive)
• Drum pad banks: 4
• Sync modes: MIDI Time Code, MIDI clock, FSK 24, 1/4-note clicks
and SMPTE (optional). SMPTE frame rates supported are 24, 25,
29.97 drop and 30.
Rear Panel Inputs/Outputs
• Record input sensitivity (both L and R): (HI gain) -58dBm, 45kΩ;
(MID gain) -38dBm, 45kΩ; (LO gain) -18dBm, 45kΩ
• Digital sampling input: S/PDIF
• Stereo output level: 6dBm, 600Ω