Page 217
Chapter 11: MIDI Function
The MIDI Implementation Charts
This section contains the MIDI implementation charts for the
MPC3000. There are two charts—one for the sequencer section, and
one for the pad and sound generator section. These charts are useful
to determine if any incompatibilities exist between the MPC3000
and your other MIDI instruments.
Model: MPC3000 (sound generator section) MIDI Implementation Chart Version: 3.0
Function Transmitted Recognized Remarks
Basic Default 16 16
Channel Channel 1-16 1-16
Default 3 3
Mode Messages ✕✕
Altered ✕✕
Note 35-98 35-98
Number True Voice 35-98 35-98
Velocity Note ON ❍❍
Note OFF ❍ (Always = 64) ✕
After Key’s ✕✕Used in Note
Touch Ch’s ✕❍Repeat feature
Pitch Bender ✕✕
Control ✕❍Can be assigned to
Change Note Variation Slider
Prog ✕ 0-127 See note below
Change True# ✕ 0-23
System Exclusive ❍❍
System :Song Pos ✕✕
:Song Sel ✕✕
Common :Tune ✕✕
System :Clock ✕✕
Real Time :Commands ✕✕
Aux :Local ON/OFF ✕✕
Mes- :All Notes Off ✕❍
sages :Active Sense ✕✕
:Reset ✕✕
Mode 1: OMNI ON, POLY Mode 2: OMNI ON, MONO ❍ : Yes
Mode 3: OMNI OFF, POLY Mode 4: OMNI OFF, MONO ✕ : No
Note : The MPC3000 numbers its 24 programs as 1-24. Incoming Program Change numbers
over 23 (i.e., 24 in MPC3000) will select program 24.
To Next Page
Loading...
Need help?
General
